Battery

Equipment for UPS Battery Testing

Fluke BT521
  • Key measurements: Battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and battery temperature.
  • Threshold comparison: Configure multiple reference values and thresholds for resistance and voltage. Comparison result feedback after each measurement via visual and verbal cues
  • Intelligent test probe set (BT520 and BT521)
MEGGER BATTERY GROUND FAULT TRACER (BGFT)
  • Easily locates ground faults in ungrounded dc systems
  • Operates in high electrical noise environment
  • High/low switch provides the needed safety and power to locate high impedance faults
  • Locates faults on systems with high capacitance
MEGGER BITE 2
  • Supply Voltage 100V-130V/210V-250V, 50/60Hz, 200VA Max
  • On-board Pass/Warning/Fail indications
  • On-line testing
  • Checks charger condition by measuring AC ripple current
MEGGER BITE 3
  • Determines health of lead-acid cells
  • On-line testing with Pass/Warning/Fail calculations
  • Measures impedance, interconnection
  • Resistance and cell voltage
  • Measures float and ripple currents
MEGGER MGFL100
  • Alarms when the real fault is identified
  • Direct measurement of resistance and stray capacitance
  • Direct measurement of fault current and leakage current
  • Adjustable current and voltage limits
  • Powered off AC or internal battery
  • Locates faults up to 400 kΩ
  • Locate faults on AC or DC systems
  • Operates on systems up to 600 V
MEGGER TORKEL 840
  • Batteries can be tested in service
  • Suitable for batteries between 12V and 288V
  • 110A maximum discharge
  • BVM cell monitor control integrated in the system
  • Test at constant power, resistance or current
  • User adjustable alarm and shutdown points to avoid excessive discharge
MEGGER TORKEL 860
  • Batteries can be tested in service
  • Suitable for batteries between 12V and 480V
  • 110A maximum discharge
  • BVM cell monitor control integrated in the system
  • Test at constant power, resistance or current
  • User adjustable alarm and shutdown points to avoid excessive discharge
MEGGER TORKEL 930
  • Batteries Can Be Tested In Service
  • Suitable For Batteries Between 12V And 300V
  • 220A Maximum Discharge
  • BVM Cell Monitor Control Integrated In The System
  • Test At Constant Power, Resistance Or Current
  • User Adjustable Alarm And Shutdown Points To Avoid Excessive Discharge.
  • 7" Color Touch Screen
MEGGER TORKEL 950
  • Batteries Can Be Tested In Service
  • Suitable For Batteries Between 12V And 500V
  • 220A Maximum Discharge
  • BVM Cell Monitor Control Integrated In The System
  • Test At Constant Power, Resistance Or Current
  • User Adjustable Alarm And Shutdown Points To Avoid Excessive Discharge
  • 7" Color Touch Screen
Megger BVM-600
  • Automates battery voltage measurement during capacity tests
  • “Daisy-chain” design allows expandability up to 120 units
  • High accuracy and stability for precise data collection
Megger Clamp XA 12991
  • DC Current Clamp converts 1000A to 1V DC
  • Measures current in external circuit
  • 2 x 5m cable and power cable for 9V input
Megger Torkel 900 Extension Cable
    • A two-lead extension cable set for Megger Torkel 900-series battery testing systems
    • 2 x 3m high rating extension cable
    • Male and female connection

Request Quote

Lets us help you find the right equipment for the job.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Visit Us

Come by the office anytime during working hours.